Product
Combined Loop and RCD Testers - Megger LRCD220
The Megger LRCD220 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised circuits. As the LRCD210 with the addition of 2 wire fast testing, plus phase to phase and phase to earth measurement. Both instruments will not trip RCDs rated at 30 mA or greater during loop testing, even electronic RCDs
Rp.25.400.000
See Details
Moisture Analyzer – Ohaus MB23
The new OHAUS MB23 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB23 offer dependable, accurate, results for a wide variety of applications. The OHAUS MB23 provide accurate results at 0.1% readability. And with your choice of infrared or halogen heating, they are ideal for textiles, wastewater, ceramics, food and other applications that require IR heating elements and measurements
Rp.42.800.000
See Details
Moisture Analyzer – Ohaus MB25
The new OHAUS MB25 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB25 offer dependable, accurate, results for a wide variety of applications. The OHAUS MB25 provide accurate results at 0.05% readability. And with your choice of infrared or halogen heating, they are ideal for textiles, wastewater, ceramics, food and other applications that require IR heating elements and measurements
Rp.47.500.000
See Details
Xray Dosimetry System - Fluke RaySafe X2
RaySafe X2 Solo is a new product line from RaySafe that covers the measurement needs of your specific X-ray modalities. It’s based on the same technology as RaySafe X2, highly esteemed for its user-friendliness and performance, but instead of multi-modality capability, each model meets specific needs. Within your X-ray modalities the X2 Solo will meet all your QA or service measurement needs
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA609
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. The ESA609 integrates all functions needed to test medical devices when patient lead testing is not required, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
Rp.123
See Details
Mdical Electrical Safety Analyzer – Fluke ESA612
The ESA612 Electrical Safety Analyzer represents the next generation in test equipment for biomedical and clinical engineering professionals that perform field service on medical equipment throughout their facilities, in clinics, and anywhere onsite service is required. Portable, lightweight, and designed for operation in tight spaces, the ESA612 offers the functionality of a simulator, multimeter and electrical safety tester in a single test tool
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA615
The ESA615 Electrical Safety Analyzer brings fast and simple automated testing in the form of a portable analyzer to healthcare technology management professionals that perform electrical safety testing on medical equipment both in the field and in facilities. Whether it is simple testing or comprehensive analysis, the ESA615 can do it all. This multifaceted device performs all primary electrical safety tests, including line (mains) voltage, ground wire (protective earth) resistance, insulation resistance, device current, and lead (patient) leakage tests
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA620
The ESA620 Electrical Safety Analyzer represents the next generation in portable, manual test tool for the biomedical technician and clinical engineer that are performing tests on medical equipment. With selections of three test loads, protective earth test currents, and two insulation test voltages this versatile product can be used worldwide to test to their standard of choice.New DSP technology offers better accuracy of leakage measurements throughout the ranges specified in the standards, and an intuitive interface guides the user through tests. The ESA620 features a large display to facilitate quick and clear indication of performed tests, criteria associated with test set up, device under test receptacle conditions and results
Rp.123
See Details
Medical Gas Flow Analyzer – Fluke VT305
The VT305 Gas Flow Analyzer is the quick and easy way to test medical gas flow and pressure devices. It is more than just gas flow meter; it analyzes the performance of a wide variety devices and multiple ventilator parameters. Examples of these gas flow meter or pressure-producing devices are: endoscopic insufflators, anesthesia machines, oxygen flow meters, pressure gauges and suction devices. Their versatility is part of what makes them the test tools of choice for healthcare quality and safety professionals
Rp.123
See Details
Medical Gas Flow Analyzer – Fluke VT650
The VT650 Gas Flow Analyzer offers high accuracy and reliability for gas flow and respiratory medical equipment, including neonatal, mechanical and high-frequency ventilators. The single, full range ±300 lpm air flow channel offers built-in oxygen, temperature and humidity measurements to streamline your testing procedure. Designed and tested to world renown Molbloc-L calibration specifications ensures traceability to global regulatory standards with measurements you can rely on
Rp.205.400.000
See Details
Medical Gas Flow Analyzer – Fluke VT900
The VT900 is Fluke Biomedical’s high-accuracy premium gas flow analyzer. The single, full range ±300 lpm air flow channel offers built-in oxygen, temperature and humidity measurements to help streamline testing and automatically compensate for environmental conditions. The VT900 features an external trigger input and special ultra-low flow and ultra-low pressure ports. These ultra-low flow and ultra-low pressure ports allow the highest accuracy for devices requiring crucial low volume and pressure testing such as anesthesia machines and flow meters. Designed and tested to world renown Molbloc-L calibration specifications ensures traceability to global regulatory standards with reliable measurements you can count on
Rp.123
See Details
Precision Humidity and Temperature Calibrator – Kaymont 2000SPAX
The field proven M2000SP with new solid state electronics for high accuracy and performance over the full operating range of humidity and temperature. The temperature compensated control probe provides higher accuracy over the range of measurement. Newly designed electronics is incorporated within the heat/cool circuitry and a more efficient peltier mechanism, has been incorporated for faster response and temperature stability. The number of ports in the chamber door has been increased to accept 5 probes with diameters of 10mm, 12mm, 15mm and 18mm. NVLAP Accredited calibration of control probe. System tested for performance at ICH guideline parameters to meet accuracy and long term stability requirements. Typical response time is 3 minutes for 70%RH step change
Rp.123
See Details