The new testo 320 is a high-quality measuring instrument for efficient flue gas analysis. Its wide measuring range makes it a reliable partner for eliminating malfunctions and emergencies, monitoring legal limit values or for daily routine work servicing heating systems. The numerous measurement menus of the testo 320 are clearly structured. Standarized menu procedures, which are stored in the instrument specifically for your country, simplify operation – depending on which standards you are dealing with.
Temperature (flue gas) : -40 to +1200 °C Draught measurement : -9.99 to +40 hPa Pressure measurement : 0 to +300 hPa O2 measurement : 0 to 21 Vol. % CO measurement (without H2-compensation) : 0 to 4000 ppm CO measurement (H2-compensated) : 0 to 8000 ppm Determination of degree of effectivity (Eta) : 0 to 120% Flue gas loss : 0 to 99.9% Ambient CO measurement (with CO probe) : 0 to 500 ppm Gas leak measurement for flammable gases (with gas leak detection probe) : Display range 0 to 10.000 ppm CH4 / C3H8 Ambient CO2 measurement (with ambient CO2 probe) : 0 to 1 Vol. % & 0 to 10.000 ppm Differential pressure, flow velocity and temperature via fine pressure probe : ±10.000 Pa & 0.15 to 3 m/s, max. -40 to +1,200 °C (dependent on probe) Storage temperature : -20 to +50 °C Operating temperature : -5 to +45 °C Power supply Battery : 3.7 V / 2,400 mAh & Mains unit: 6 V / 1.2 A Memory : 500 measurement values Weight : 573 g Dimensions : 240 x 85 x 65 mm
Modern and powerful flue gas analyser for residential and commercial heating installations. DELTAsmart enables you to measure flue gas, pressure and temperature in one device. It is ideally suited for all control and adjustment work at gas, oil-fired, condensing and wood-burning boilers.
The slim multi talent handheld flue gas analyser using up to 7 sensors. Suitable for emission monitoring of combustions and industrial processes Intuitive software menu and bright colour display will guide you through all measuring programs. Store up to 16.000 data sets directly in the analyser’s internal data storage or on micro-SD card, or even use Bluetooth™ for wireless data transfer to notebook or MRU4u data app for smartphone or tablet. Printing via infrared, high speed thermal printer is at the tip of your fingers.
Multigas analyser, designed for biogas measurements as well as engine fluegas. With OPTIMA Biogas we offer you additionally measurement of biogas pressure and temperature, gas flow velocity, with normalized flow rate calculation. OPTIMA Biogas may measure, given an appropriate sensor configuration, CHP engine exhaust gases as well.