Bacharach's MGS-250 Infrared Refrigerant Gas Detector is the leader in performance and flexibility. It can be configured as either a broadband sensor used for gross leak detection, or as a gas-specific version that’s pre-calibrated and characterized for precision response to individual refrigerants. The MGS-250 is the economical solution for detecting refrigerants without the limitations posed by solid-state sensor technologies. Advanced infrared sensing technology makes the MGS-250 immune to cross sensitivities from combustible and toxic gases, as well as changes in temperature and humidity. The infrared sensor provides low-level leak detection and delivers up to 5 to 7 years of virtually maintenance-free operation. The MGS-250 has an alpha-numeric LED display, status indicator, on-board relay, and alarm to alert personnel when levels have exceeded the preset limit.
Type : Leak detector using IR sensors Gases : Refrigerants – CFCs, HCFCs, HFCs, HFOs Measuring range : 0 to 3,500 ppm Display : 4-digit, 7-segment red LED and green status LED Output analog : 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V Output digital : Modbus RTU via RS 485 Power supply : 24 VDC or 24 VAC; 3- or 4-wire Relay : 1 alarm relay, SPDT Rating 1 A @ 24 VDC, 0.25 A @ 240 VAC, resistive load Alarm delay 0 to 15 minutes; user-programmable Ambient conditions : Temperature : - 22 to +104 °F (- 30 to +40 °C) Humidity : 5 to 90 %RH, non condensing Altitude : 0 to 10,000 ft (3,050 m) Enclosure : ABS; snap-in cable gland for 0.115 to 0.25” cable Size (w x h x d) : Approx. 4.0” x 5.5” x 1.5” (100 x 140 x 40 mm) Weight : Approx. 6.3 oz (180 g) Approvals : CE, UL, CSA, IEC, EN 61010-1
The GX-8000 sets the new industry standard for rugged, reliable portable gas detection. It’s tough, water proof design utilized features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.
The RX-8000 sets the new industry standard for rugged, reliable portable gas detection. It’s tough, water proof design utilized features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.
The RX-8500 sets the new industry standard for rugged, reliable portable gas detection. It’s tough, water proof design utilized features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.