The PGM-IR offers superior performance and functionality for low ppm level leak detection of refrigerants, Carbon Dioxide, Nitrous Oxide or Sulfur Hexafluoride. A built-in library of 50 refrigerants enables the PGM-IR to accurately detect the smallest leaks at their source. The unit is immune to sudden changes in temperature or humidity and to over-exposure. The PGM-IR requires no zeroing of positive readings with extended exposure to gas. It has a data logging capacity of up to 200 readings. With its high flow rate, real-time ppm concentrations or TWA values are displayed instantly with corresponding audible tick-rate indicator to precisely pinpoint leaks. Rapid clearing time enables accurate ambient-air leak detection using the probe along a chiller or display-case.
Type : Portable Gas Monitor using infrared NDIR sensor Refrigerants : CFCs, HFCs, HCFCs, HFOs Natural refrigerant : CO2 Medicine and propellant : N2O Inert gas : SF6 Measuring range : Refrigerants : 0 to 10,000 ppm CO2 : 0 to 8,000 ppm N2O, SF6 : 0 to 1,000 ppm Sensitivity : 1 ppm Flow rate : 1 L/min (typical) Response time : t90 ≤ 5 s Display : Backlit graphic LCD; audible ticker Battery : Rechargeable Li-Ion, 8 hours of continuous operating time Temperature : 32 to +122 °F (0 to +50 °C) Humidity : 5 to 90 %RH, non condensing Altitude : 0 to 6,560 ft (2,000 m) Enclosure : Powder coated aluminum in soft case with shoulder strap Size (w x h x d) : Approx. 19” x 5” x 8” (500 x 130 x 200 mm) Weight : Approx. 7 lbs. (3.2 kg) Approvals : CE mark; NOT approved for use in classified, hazardous areas
Modern and powerful flue gas analyser for residential and commercial heating installations. DELTAsmart enables you to measure flue gas, pressure and temperature in one device. It is ideally suited for all control and adjustment work at gas, oil-fired, condensing and wood-burning boilers.
The slim multi talent handheld flue gas analyser using up to 7 sensors. Suitable for emission monitoring of combustions and industrial processes Intuitive software menu and bright colour display will guide you through all measuring programs. Store up to 16.000 data sets directly in the analyser’s internal data storage or on micro-SD card, or even use Bluetooth™ for wireless data transfer to notebook or MRU4u data app for smartphone or tablet. Printing via infrared, high speed thermal printer is at the tip of your fingers.
Multigas analyser, designed for biogas measurements as well as engine fluegas. With OPTIMA Biogas we offer you additionally measurement of biogas pressure and temperature, gas flow velocity, with normalized flow rate calculation. OPTIMA Biogas may measure, given an appropriate sensor configuration, CHP engine exhaust gases as well.