The MVR-300 detector is specifically designed to provide continuous monitoring for refrigerants associated with high-efficiency, high volume refrigerant cooling and heating systems, such as VRF/VRV (Variable Refrigerant Flow/Variable Refrigerant Volume) systems. Typical applications include hotels, dormitories, hospitals, office buildings, and apartment buildings. The MVR-30 audible and visual alarms alert occupants and simultaneously communicate to Building Management Systems/Building Automation Systems (BMS/BAS). Two on-board relays can be used to close valves, activate alarm devices and exhaust fans or initiate emergency calls to rescue teams.
Detectable gases : R-410A, R-407C, R-404A, R-32 Measuring ranges : 2,500 ppm, 5,000 ppm, 10,000 ppm Housing : Flush mount, white ABS, fits in most 2-gang electrical back-boxes Protection : Indoor: IP40, NEMA 1 Power : 100 to 240 VAC, 50/60 Hz, 4 W max. Indicator : Tri-color LED: green, amber, red Buzzer : 80 dB at 12" (30 cm) Relay : Two SPDT: low alarm and high alarm / fault, normal or fail-safe; configurable Alarm Delay : 0 to 15 minutes; configurable 0, 5, 10, 15 Wiring : Power: 3-core cable, 14 to 20 AWG (0.5 to 2.0 mm2) Relay: 3-core cable, 18 to 20 AWG (0.5 to 1.0 mm2) Modbus: 2-core twisted pair shielded cable 18 to 24 AWG Modbus RTU : Baud Rage: 9,600 or 19,200; configurable Environmental conditions : Operating Temperature: 32 to 120°F (0 to 50°C) Storage Temperature : 5 to 100°F (-20 to 40°C) Humidity : 5 to 90% RH, non-condensing Pressure : 23.6 to 32.5 inch of Hg (800 to 1,100 hPa)
Elevation : 0 to 6,560 ft. (2,000 m) altitude Sensor life : 2 year minimum life with recommended 6 month testing and/or recalibration Approvals : CE, UL/CSA/IEC/EN 61010-1 Size (L x W x D, approx.) : 6" x 4.1" x 1.75" (150 x 105 x 45 mm) including bezel Weight (approx.) : 8 oz (230 g)
Modern and powerful flue gas analyser for residential and commercial heating installations. DELTAsmart enables you to measure flue gas, pressure and temperature in one device. It is ideally suited for all control and adjustment work at gas, oil-fired, condensing and wood-burning boilers.
The slim multi talent handheld flue gas analyser using up to 7 sensors. Suitable for emission monitoring of combustions and industrial processes Intuitive software menu and bright colour display will guide you through all measuring programs. Store up to 16.000 data sets directly in the analyser’s internal data storage or on micro-SD card, or even use Bluetooth™ for wireless data transfer to notebook or MRU4u data app for smartphone or tablet. Printing via infrared, high speed thermal printer is at the tip of your fingers.
Multigas analyser, designed for biogas measurements as well as engine fluegas. With OPTIMA Biogas we offer you additionally measurement of biogas pressure and temperature, gas flow velocity, with normalized flow rate calculation. OPTIMA Biogas may measure, given an appropriate sensor configuration, CHP engine exhaust gases as well.