The H-10 PRO is a highly responsive universal refrigerant leak detector using Bacharach’s tried-and-true heated diode sensor technology. It’s ultra-sensitive to all halogen-based, non-flammable CFC, HFC and HCFC refrigerants for reliable use in a wide range of refrigerant leak detection applications. The H-10 PRO has a long probe (4.5 ft.) for detecting leaks in hard-to-reach areas, visual and audible indicators to show relative leak sizes and an auto-zeroing feature (automatic mode only) for finding leaks in backgrounds where target gas is present. It has an internal sensor calibration reference to ensure optimum performance.
Refrigerants detected : All CFC, HFC and HCFC refrigerants, including but not limited to: R-12, R-22, R-134a, R-404A, R-410A, R-502, R-507, HFO-1233zd, HFO-1234yf and HFO-1234ze Sensitivity : 0.006 oz/yr (stationary) & 0.1 oz/yr (moving per SAE J2791) Response time : 1 second Leak indicators : Visual (red LED in probe tip) and audible (via internal speaker or headphones) Automatic background adjustment : Yes, in automatic mode Power : 12 VDC internal rechargeable battery or via 100-240 VAC wall adapter/charger Run time : 3 hours (typical) on fully-charged battery Sensor life : 1 year (typical) Operating conditions : 32 to 104 °F (0 to 40 °C), 10 to 90% RH (non-condensing), 1 ATM Warm-up time : 2 minutes (approximate) Approvals : CE mark Size (H x W x D) : Unit : 8.3 x 10.5 x 5.4 in. (21.1 x 26.7 x 13.7 cm) Probe : 4.5 ft. (1.37 m) Weight : 5.1 lbs. (2.3 kg)
Modern and powerful flue gas analyser for residential and commercial heating installations. DELTAsmart enables you to measure flue gas, pressure and temperature in one device. It is ideally suited for all control and adjustment work at gas, oil-fired, condensing and wood-burning boilers.
The slim multi talent handheld flue gas analyser using up to 7 sensors. Suitable for emission monitoring of combustions and industrial processes Intuitive software menu and bright colour display will guide you through all measuring programs. Store up to 16.000 data sets directly in the analyser’s internal data storage or on micro-SD card, or even use Bluetooth™ for wireless data transfer to notebook or MRU4u data app for smartphone or tablet. Printing via infrared, high speed thermal printer is at the tip of your fingers.
Multigas analyser, designed for biogas measurements as well as engine fluegas. With OPTIMA Biogas we offer you additionally measurement of biogas pressure and temperature, gas flow velocity, with normalized flow rate calculation. OPTIMA Biogas may measure, given an appropriate sensor configuration, CHP engine exhaust gases as well.