Product
Flue Gas Analyzer for Industry – Testo 340
The unique measuring range extension allows unrestricted measurements to be carried out even at high gas concentrations. The testo 340 is equipped with an O2 sensor as standard. Three further gas sensors can be configured individually, in order to be able to adapt the instrument optimally to the respective measurement task. The instrument can also be operated remotely from your Andrroid Smartphone or tablet using the free App. The compact design and the reliable technology make it the ideal measuring instrument for commissioning, service and maintenance work and in test measurements on industrial burners, stationary industrial engines, gas turbines and thermal processes.
Rp.123
See Details
Moisture Analyzer – AND MS70
A&D Weighing introduces the latest innovation in moisture determination. Incorporating A&D’s extremely fast Super Hybrid Sensor technology, the MS-70 is ideal for simple measurement and low moisture content measurement applications. The MS-70 is A&D Weighing's most accurate moisture analyzers because of its 0.0001g weighing resolution and 0.001% of moisture content measurement for very small moisture content applications, e.g. Plastic, Chemical, Pharmaceutical, Oil, or any moisture analysis application. A&D’s MS-70 moisture analyzer boasts a major advantage over other moisture analyzer devices, namely, the ability to conduct analysis of a sample containing very little moisture content.
Rp.61.900.000
See Details
Moisture Analyzer – AND MX50
MX-50 moisture analyzer offering the latest in weighing technology implementing the Super Hybrid Sensor with moisture balance features that outshine the competition. A&D MX-50 (51g x 0.001g) determines to 0.01 percent moisture, 50-200°C in 1°C increments, 50 Memory ID, RS-232 interface and standard WinCT software included. Uncompromising rapid moisture measurements are only a click away when you you select A&D MX-50 moisture balance. Top notch performance measurements and functionality from a leader in the weighing industry - A&D Weighing.
Rp.44.800.000
See Details
Moisture Analyzer – AND MF50
The innovative Heat Chamber houses a 400 Watt Halogen heating lamp producing fast and accurate results aided by its uniquely designed SRA (Secondary Radiation Assist) Filter, which serves to radiate heat uniformly, protect the lamp from spatter from the sample under test, and provides a Progress Monitoring Window. When price is the #1 factor and you want a quality moisture determination instrument to 1% moisture content determination then you should review the ML50 moisture balance HERE.
Rp.39.400.000
See Details
Moisture Analyzer - AND ML50
Low cost ML-50 moisture analyzer is ideal for many wastewater applications when you're on a tight budget. This moisture balance provides a rapid and accurate method for moisture content and dry weight analysis of a wide range of products and materials. In research work, as well as in manufacturing and quality control applications it is essential to be able to determine moisture content simply and reliably. This 51g AND ML-50 moisture balance has fast and uniform heating with a straight halogen lamp and innovative SRA (Secondary radiation Assist) technology shorten measurement time. It has a resolution of 0.005g. Sodium Tartrate Dehydrate with its stable moisture rate comes standard for accuracy checking.
Rp.35.700.000
See Details
Primary Injection Test System - SMC Raptor
For high current applications, the Raptor implements the ‘pass-through secondary’ technique, with a centered hole that confers to this product a unique personality. You only need to drive the current conductor through the Raptor and attach both ends to the device under test. Multiple cables can be used in parallel to increase the effective cross section, and the compliance voltage can be easily multiplied by just doing multiple turns around the unit. If additional power is required,5-kVA slave units can be added for up to a total 18 kVA and a maximum 15,000 A injection. These units communicate with the master Raptor via an infrared link, so no physical interconnections are required. An integrated software calculator allows determining the equipment and cabling required to attain a specific amount of current easily.
Rp.123
See Details
Primary Injection Test System - SMC Raptor HV
The Raptor HV connects to the master unit via the Expansion Port, from where it also takes the necessary power. You can think of the Raptor HV as a pluggable high voltage peripheral that takes advantage of all the valuable features in the Raptor Master including the electronically controlled switching amplifier, DSP based intelligence and a robust communication and device synchronization system. Naturally the HV’s control is fully integrated in the master’s console. The voltage signal generated by the master at the expansion port is raised by the HV up to two user selectable ranges, 1kV and 2kV, and the output is measured in current, voltage and phase angle to provide adequate injection control and application’s feedback.
Rp.123
See Details
Primary Injection Test System - SMC LET400 RDC
AC Current Test Set up to 2.5 kA with Auxiliary DC Source. The LET-400-RDC is designed to perform most of the primary tests that are necessary in substations commissioning. It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of all the elements that compose the protection and measuring section in a substation. The LET range addresses test applications that require high levels of AC or DC current, typically primary current injection. The generation power of the various models ranges from 1,000 to 8,000 VA or Watt. The output voltage is adjusted by means of a variac at the primary winding of the output transformer. The injected current is measured and displayed by a built-in digital ammeter. Some LET versions feature a motorized variac for applications that require a greater separation between the power output and the control & regulation panel.
Rp.123
See Details
Primary Injection Test System – SMC LET1000 RD
AC Current Test Set up to 6 kA. The LET-1000-RD is designed to perform most of the primary tests that are necessary in substations commissioning. It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of all the elements that compose the protection and measuring section in a substation. The regulation system is based on a continuously variable autotransformer (Variac) that supplies to a power transformer that delivers the high current outputs and isolate the main supply from the load. A built-in ammeter and a timer gives the information about the current value and the operation time of the relay or breaker under test.
Rp.123
See Details
Primary Injection Test System – SMC LET2000 RD
AC Current Test Set up to 10 kA. The LET-2000-RD is designed to perform most of the primary tests that are necessary in substations commissioning. It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of all the elements that compose the protection and measuring section in a substation. The regulation system is based on a continuously variable autotransformer (Variac) that supplies to a power transformer that delivers the high current outputs and isolate the main supply from the load. A built-in ammeter and a timer gives the information about the current value and the operation time of the relay or breaker under test.
Rp.123
See Details
Primary Injection Test System – SMC LET2000 RDM
AC Current Injector up to 10 kA. The LET-2000-RDM is designed to perform most of the primary tests that are necessary in substations commissioning. It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of all the elements that compose the protection and measuring section in a substation. The regulation system is based on a continuously variable motorized autotransformer (Variac) that supplies to a power transformer that delivers the high current outputs and isolate the main supply from the load. A built-in ammeter and a timer gives the information about the current value and the operation time of the relay or breaker under test.
Rp.123
See Details
Primary Injection Test System – SMC LET4000 RD
AC Current Test Set up to 20 Ka. The LET-4000-RD is designed to perform most of the primary tests that are necessary in substations commissioning. It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of all the elements that compose the protection and measuring section in a substation. The regulation system is based on a continuously variable autotransformer (Variac) that supplies to a power transformer that delivers the high current outputs and isolate the main supply from the load. A built-in ammeter and a timer gives the information about the current value and the operation time of the relay or breaker under test.
Rp.123
See Details