Product
Portable EC/TDS Meter – Hanna Hi99301
The Hi99301 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. It is supplied with a two-ring conductivity probe to allow for high range EC measurements from 0.00 to 20.00 mS/cm and TDS measurements from 0.00 to 10.00 ppt. All readings are adjusted with Automatic Temperature Compensation (ATC) and users are able to adjust the temperature correction coefficient and TDS factor for accurately compensated measurements
Rp.9.100.000
See Details
Portable PH-EC-TDS Meter – Hanna Hi9813-6
The Hi9813-6 is an economical, water resistant, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The Hi9813-5 has a variable EC to TDS conversion factor that automatically changes from 0.56 to 0.78 ppm = 1 µS/cm based on the actual EC reading
Rp.8.800.000
See Details
Benchtop COND/TDS/SAL Meter - Hanna edge Hi2003
Hanna Instruments is proud to introduce the world’s most innovative Conductivity/TDS/Salinity meter. edge®’s groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production and world-class R&D. edge® is a single meter that can measure Conductivity, TDS and Salinity and is incredibly easy to use. edge® EC/TDS/Salinity utilizes four ring conductivity probe technology that allows the user to measure samples from very low conductivity to very high conductivity.
Rp.25.300.000
See Details
Digital Insulation Tester - Yokogawa MY40
The MY40 insulation tester is used to measure the Insulation resistance that represents the state of insulation of electric equipment or circuits; It is one of the important measurement parameters in terms of safety and security. The MY40 comes with 4 voltage/resistance ratings on an easy-to-view large display, and incorporates a double-action safety mechanism to keep the user from harm.
Rp.123
See Details
Process Multimeter - Yokogawa CA450
The Yokogawa CA450 Process Multimeter is a portable test instrument to combine a digital RMS multimeter and a loop calibrator to give process technicians the same functionality in one tool. The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor. Process technicians can now do the same job while carrying less equipment
Rp.123
See Details
Earth Tester - Yokogawa EY200
The Yokogawa EY200 Digital Earth Tester is an earth resistance tester for testing power distribution lines, in-house wiring system, electrical appliances etc. The Yokogawa EY-200 also has an earth voltage range for earth voltage measurement. A simplified 2-pole measuring method can be used if there is an almost perfectly earth/ground object such as a lead or iron water-pipe (plastic pipes cannot be used) or if there is an object with a known value of earth resistance, near the measurement site. The Yokogawa ey200 Digital Earth Tester is dust and drip resistant (IP54 rated)
Rp.123
See Details
Process-Volt-mA Calibrator - Yokogawa CA310
The CA300 Series is a high accuracy source and measure portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing. Available in 3 models, the CA310, CA320, and CA330 provide an ergonomic and friendly user-interface making it easy to use
Rp.24.900.000
See Details
Low Pressure Calibrator - Yokogawa CA700
The Low Pressure Calibrator CA700 is the most accurate calibrator in the portable calibrator class having a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source measurement. Supporting “As Found”, “As Left” and error rate, makes the CA700 a great tool for field calibration and maintenance work. Available in low pressure, medium pressure or high pressure ranges with selectable high-performance hand pumps for each range
Rp.123
See Details
Refractometer - Atago PAL1
The PAL is a completely new and redesigned digital hand-held instrument that will change the traditional conceptions of refractometers. The PAL's surprisingly compact size allows you to easily carry it around and use it indoors as well as outdoors. The size, design, function and performance will surprise you. The PAL will expand your range of measuring possibilities.
Rp.6.000.000
See Details
Refractometer - Atago PAL2
Since the measurement range of PAL-2 is Brix 45.0 - 93.0%, it can measure various high concentration samples such as jam, marmalade, jelly, honey and concentrated juice. The International Protection class of PAL-2 is IP65, so it can clean thick samples under running water. When boiling jam or marmalade are measured, the PAL-2 gives steady measurement values as the measurement is repeated for a few times.
Rp.5.900.000
See Details
Refractometer - Atago PAL3
The PAL is a completely new and redesigned digital hand-held instrument that will change the traditional conceptions of refractometers. Designed with a full Range (Brix 0.0 to 93.0%), the PAL-3 works perfectly for measuring almost any sample. The Full Range PAL-3 has the same great features as the PAL-1 and PAL-2.
Rp.16.800.000
See Details
Refractometer - Atago PALα
The PAL-α is a special model with a wide brix range (0-85%) offered at a very reasonable price. PAL-α is useful for measuring most kinds of samples as well as samples that are in the cooking process. Designed with a water resistant feature, the PAL-α can be washed under running water. PAL-α is equipped with the same great features as the other PAL units.
Rp.8.500.000
See Details