3Channel DC Voltage Datalogger – Extech SD910
Extech's SD910 allows technicians to easily monitor and record DC mV values from 3 external sensors, transducers, and other sources using one meter. It also stores the time and date of when readings are taken. The logger features a large triple LCD display and records data on an SD card in an Excel®-ready format for easy transfer to a PC for analysis, trending, and archiving
Rp.13.300.000
See Details
Combined Loop and RCD Testers - Megger LRCD210
The Megger LRCD210 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised circuits. LRCD210 provides three phase safe non-trip loop testing and 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable for domestic installers testing to UK Part P requirements
Rp.22.700.000
See Details
Combined Loop and RCD Testers - Megger LRCD220
The Megger LRCD220 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised circuits. As the LRCD210 with the addition of 2 wire fast testing, plus phase to phase and phase to earth measurement. Both instruments will not trip RCDs rated at 30 mA or greater during loop testing, even electronic RCDs
Rp.25.400.000
See Details
Xray Dosimetry System - Fluke RaySafe X2
RaySafe X2 Solo is a new product line from RaySafe that covers the measurement needs of your specific X-ray modalities. It’s based on the same technology as RaySafe X2, highly esteemed for its user-friendliness and performance, but instead of multi-modality capability, each model meets specific needs. Within your X-ray modalities the X2 Solo will meet all your QA or service measurement needs
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA609
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. The ESA609 integrates all functions needed to test medical devices when patient lead testing is not required, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
Rp.123
See Details
Mdical Electrical Safety Analyzer – Fluke ESA612
The ESA612 Electrical Safety Analyzer represents the next generation in test equipment for biomedical and clinical engineering professionals that perform field service on medical equipment throughout their facilities, in clinics, and anywhere onsite service is required. Portable, lightweight, and designed for operation in tight spaces, the ESA612 offers the functionality of a simulator, multimeter and electrical safety tester in a single test tool
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA615
The ESA615 Electrical Safety Analyzer brings fast and simple automated testing in the form of a portable analyzer to healthcare technology management professionals that perform electrical safety testing on medical equipment both in the field and in facilities. Whether it is simple testing or comprehensive analysis, the ESA615 can do it all. This multifaceted device performs all primary electrical safety tests, including line (mains) voltage, ground wire (protective earth) resistance, insulation resistance, device current, and lead (patient) leakage tests
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA620
The ESA620 Electrical Safety Analyzer represents the next generation in portable, manual test tool for the biomedical technician and clinical engineer that are performing tests on medical equipment. With selections of three test loads, protective earth test currents, and two insulation test voltages this versatile product can be used worldwide to test to their standard of choice.New DSP technology offers better accuracy of leakage measurements throughout the ranges specified in the standards, and an intuitive interface guides the user through tests. The ESA620 features a large display to facilitate quick and clear indication of performed tests, criteria associated with test set up, device under test receptacle conditions and results
Rp.123
See Details
Current and Voltage Relay Testing - SMC PTE-100-C-PRO
The PTE-100-C and the Plus and Pro versions were designed as powerful, rugged and flexible tools for the wide diversity of maintenance jobs in substations and transformation centers. Both feature a 1000-VA voltage regulator and highly accurate digital instruments that provide the quality and effectiveness required for in-field testing of power-demanding electromechanical relays, as well as static, digital and the most sophisticated multi-functional numerical relays where precision and ease of use are essential
Rp.123
See Details
Three Phase Relay Tester – SMC PTE-50-CET
The equipment comprises of three independent output channels that can be selected as current or voltage. This enables the unit to be used as a complete single-phase equipment (voltage, current, and phase angle between them) or, with channels synchronised, as a three phase current or three phase voltage generator from a single phase mains input. The unit is extremely compact and rugged. The design incorporates the latest in modern digital microprocessor technology to achieve unbeatable output characteristics in terms of power, accuracy, low distortion, and dynamic capability. This technology allows users to test many different specific functions required in relay testing, without the need of additional accessories
Rp.123
See Details
Clamp Meter - Fluke 317
The new Fluke 317 clamp meter is designed based on detailed research into the specific
requirements of electrical engineers. The small clamp meter head and lightweight, compact body make it ideal for use in confined spaces. The 40A range low current measurement (0.01A resolution) design is unique and allows users to accurately measure small currents. At the same time, the clamp meter also has functions such
as accurate, True RMS measurements, maximum/minimum values, zeroing, background
light display, display protection and is a powerful tool in carrying out daily maintenance and installations
requirements of electrical engineers. The small clamp meter head and lightweight, compact body make it ideal for use in confined spaces. The 40A range low current measurement (0.01A resolution) design is unique and allows users to accurately measure small currents. At the same time, the clamp meter also has functions such
as accurate, True RMS measurements, maximum/minimum values, zeroing, background
light display, display protection and is a powerful tool in carrying out daily maintenance and installations
Rp.123
See Details
Clamp Meter - Fluke 319
The new 319 clamp meter is designed based on detailed research into the requirements of electrical engineers. It can be used to test both starting current (inrush) and frequency. A small clamp head and compact, lightweight body make it perfect for use in confined spaces. 40A range low current measurement (0.01A resolution) is a unique design allowing users to measure small currents more easily. At the same time, the clamp also offers features such as True RMS, maximum/minimum, zeroing, backlight display and display hold. The 319 clamp meter is therefore a powerful tool for use in the daily maintenance and installation of electronics
Rp.123
See Details